Course Name
Introduction to Dynamics of Processing Equipment
Course Overview 
Level of study	Bachelor Degree	
Workload	ECTS: 4
Total Hours: 144
Contact Hours: 72
•	Lectures: 24 hours per semester
•	Labs: 48 hours per semester
•	Seminars: 0	
Course Code		
Semester	Winter/Summer	
Prerequisites	Physics, Theoretical Mechanics, Theory of machines and mechanisms.	
Course Objectives	At the end of this course, the student will be able to:
• carry out force analysis of machinery through application of the principle of virtual work; 
• model elements of single degree of freedom systems and perform free vibration analysis of such systems; 
• obtain forced response of single degree of freedom systems due to harmonic forcing;
• carry out free vibration analysis of multi degree of freedom systems with no damping; 
• design a flywheel to suit to a given speed fluctuation limit and to a specified set of supply torque-load combination in machinery.	
Learning Outcomes
	1. Ability to conduct force analysis of machinery through application of the principle of virtual work. 
2. Capability to analyze static and dynamic equilibrium conditions in machinery and to derive the governing equation(s) of motion. 
3. Ability to model equivalent inertial, elastic and damping properties of single degree of freedom systems based on energy equivalence. 
4. Ability to write equation of motion of single degree of freedom systems and to derive undamped and damped natural frequency expressions. 
5. Ability to identify damping and natural frequency in the free vibration response of single degree of freedom systems. 
6. Ability to obtain amplitude and phase characteristics associated with the forced response of single degree of freedom systems. 
7. Ability to design inertial, stiffness and damping properties for vibration isolation. 
8. Ability to formulate equations of motion for a multi degree of freedom system. 
9. Ability to solve equations of motion for undamped natural frequencies and associated mode shapes. 
10. Ability to obtain free vibration response of a multi degree of freedom system due to a specified set of initial conditions. 
11. Ability to specify flywheel characteristics for a specified limit of speed fluctuation in reference to a machine load torque and prime mover supply torque configuration over a working cycle.	
Syllabus
	Topic 1. Virtual work method. 
Topic 2. Driving torque characteristics and machine-prime mover interactions. 
Topic 3. Modeling and elements of vibratory systems.
Topic 4. Free and forced vibrations of single degree-of-freedom systems. 
Topic 5. Introduction to multi degree-of-freedom systems. 
Topic 6. Vibration control. 
Topic 7. Critical speeds of shafts. 
Topic 8. Balancing of rotating machinery. 	
Labs
	Lab 1.  Study of the dynamic of single-mass model of the elastic system.
Lab 2. Amplitude-phase frequency response of single-mass model of the elastic
Lab 3. Spectral analysis of the dynamic of single-mass model of the elastic
Lab 4. Study of the dynamic model of single-mass model of the elastic system in block diagram form.
Lab 5. Study of the dynamic of tow-mass model of the elastic system.
Lab 6. Study of the dynamic of multi degree-of-freedom of the elastic system.
Lab 7. Study methods of vibration control.
Lab 8. Balancing of rotating machinery.	
Projects	-	
Assessment	exam	
Resources		
Instructors	Deryusheva Valentina Nikolaevna
http://portal.tpu.ru:7777/SHARED/v/VDERUSHEVA/eng	
Примечание: пример описания дисциплины можно посмотреть по ссылке: http://www.ecs.soton.ac.uk/module/COMP6233#overview