Influence of High-Intensity Zr Ion-Beam Treatment on Deformation and Fracture of 12Cr1MoV Steel under Static, Cyclic and Dynamic Loadings / I. V. Vlasov [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 49-54]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.49
Physical and Chemical Aspects of Formation of Epoxy Composite Material with Microfilling Agent / A. Buketov [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 143-148]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.143
Regularities of Impact Failure of Epoxy Composites with Al[2]O[3] Microfiller and their Analysis on the Basis of External Surface Layer Concept / A. Buketov [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 149-154]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.149
Improvement of Wear Resistance of UHMWPE by Adding Solid Lubricating Fillers / S. V. Panin [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 155-160]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.155
Influence of Nano- and Microfillers on the Mechanical and Tribotechnical Properties of "UHMWPE-PTFE" Composites / S. V. Panin [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 161-165]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.161
Polyfunctional Coatings on the Basis of Powder Paints Electrostatically Sprayed from the Composite Mixtures Treated in Planetary Ball Mill / S. V. Panin [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 166-170]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.166
Investigation of Acoustic Parameters for Structural Health Monitoring of Sandwich Panel under Cyclic Load / A. V. Eremin [et al.] // Key Engineering Materials : Scientific Journal. — 2016. — Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016). — [P. 319-323]. — URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.712.319
Mechanical state assessment using lamb wave technique in static tensile tests / M. V. Burkov [et al.] // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science. — [012009, 7 p.]. — URL: http://dx.doi.org/10.1088/1757-899X/156/1/012009
Comparison of mechanical and tribotechnical properties of UHMWPE reinforced with basalt fibers and particles / S. V. Panin [et al.] // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science. — [012026, 6 p.]. — URL: http://dx.doi.org/10.1088/1757-899X/156/1/012026
Diagnostics of Glass Fiber Reinforced Polymers and Comparative Analysis of Their Fabrication Techniques with the Use of Acoustic Emission / O. V. Bashkov [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020012, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966305
Comparative Analysis of Methods for Determination of the Thermal Characteristics of Filled Polymer Composites / S. A. Bochkareva [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020017, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966310
Tribological Properties of Epoxy Composite Materials for Marine and River Transport / А. V. Buketov [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020020, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966313
Stress-Strain State in "Coating-Substrate" System after Coating Stability Loss Induced by Impact of Thermal Stresses / P. A. Lyukshin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020142, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966435
Computer Simulation of Material Behavior at the Notch Tip: Effect of Microrotations on Elastic Energy Release / P. A. Lyukshin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020157, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966450
Panin, S. V. Complex Algorithm of Optical Flow Determination by Weighted Full Search / S. V. Panin, V. O. Chemezov, P. S. Lyubutin // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020178, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966472
Algorithm of Crack Tracking During Fatigue Test through Calculating the Optical Flow / S. V. Panin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020179, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966473
Influence of Carbon Nano- and Micron-Sized Fibers on Structure, Mechanical and Tribotechnical Properties of Polymer Composites with UHMWPE Matrix / S. V. Panin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020180, 5 p.]. — URL: http://dx.doi.org/10.1063/1.4966474
Application of Bilateral Filtration with Weight Coefficients for Similarity Metric Calculation in Optical Flow Computation Algorithm / S. V. Panin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020181, 6 p.]. — URL: http://dx.doi.org/10.1063/1.4966475
Influence of Strain Localization on Deformation Mechanisms and Fracture of 12Cr1MoV Steel with Various Notch Shape under Impact Loading / S. V. Panin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020182, 6 p.]. — URL: http://dx.doi.org/10.1063/1.4966476
Influence of Notch Shape on Deformation Mechanisms and Energy Parameters of Fracture of 12Cr1MoV Steel under Impact Loading / S. V. Panin [et al.] // AIP Conference Proceedings. — 2016. — Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. — [020183, 4 p.]. — URL: http://dx.doi.org/10.1063/1.4966477
Расписание
