SEARCH:
Нет данных.
  
    New Tab     
1. Saraev, Yu.N., Chinakhov, D.A. Regression models of mechanical properties of the multi-layered welded joints of 30KhGSA steel. Svarochnoe Proizvodstvo. 2002. № 5. Pp. 3-5. 2. Chinakhov, D.A., Saraev, Yu.N. Production technology of the multi-layered welded joints from 30KhGSA steel without heating. Svarochnoe Proizvodstvo. 2002. № 7. Pp. 18-20. 3. Chinakhov D.A., Agrenich E.P. Computer simulation of thermo-mechanical processes at fusion welding of alloyed steels. Materials Science Forum. Vols. 575-578 (2008). Pp. 833-836. 4. Chinakhov D. A. Study of thermal cycle and cooling rate of steel 30ХГСА single-pass weld joints. Applied Mechanics and Materials. – Vols. 52-54. – 2011. – p. 442-447. Mode of access: http://www.scientific.net/AMM.52-54.442 5. Iljyashchenko D. P., Chinakhov D.A. Thermal Imaging Investigations of the Temperature Fields on the Surface of a Welded Item during Manual Arc Welding with Coated Electrodes. Russian Journal of Nondestructive Testing. 2011. Issue 47. №. 11. Pp. 724-729. 6. Iljyashchenko D. P. , Chinakhov D. A. Investigating the Influence of the Power Supply Type upon the Weld Joints Properties and Health Characteristics of the Manual Arc welding. Materials Science Forum. 2012 (dec. 2011). Vol. 704. Pp. 608-611. Mode of access: www.scientific.net/MSF.704-705.608. 7. Chinakhov D.A., Vorobyov A.V., Davydov A.A., Tomchik A.A. Simulation of active shielding gas impact on heat distribution in the weld zone of consumable electrode welding // The 7th International Forum on Strategic Technology IFOST2012, September 17-21, 2012, Tomsk Polytechnic University, VOLUME II. P. 136-138. 8. Iljyashchenko D.P., Chinakhov D.A. Improvement of health and safety characteristics of shielded metal arc welding with inverter power source // The 7th International Forum on Strategic Technology IFOST2012, September 17-21, 2012, Tomsk Polytechnic University, VOLUME I. P. 19-21. 9. Chinakhov D.A., Vorobyov A.V., Tomchik A.A. Simulation of active shielding gas impact on heat distribution in the weld zone. Materials Science Forum. Vol. 762 (2013). Pp. 717-721. 10. Chinakhov D.A. Calculation of Gas-dynamic Impact of the Active Shielding Gas on the Electrode Metal Drop in Gas Jet Shielded Welding. Applied Mechanics and Materials. Vol. 379 (2013). Pp. 188-194. 11. Chinakhov D.A., Zuev A.V., Filimonenko A.G. Gas-dynamic Impact of a Shielding Gas Jet on the Drop Transfer When Welding with a Consumable Electrode. Advanced Materials Research Vol. 1040 (2014) pp. 850-853. www.scientific.net/AMR.1040.850 12. Chinakhov D.A., Il’yaschenko D.P., Gotovschik Y.M. Investigating the influence of the power supply type upon the properties of the weld joints under manual arc welding. Advanced Materials Research Vol. 1040 (2014) pp. 837-844. www.scientific.net/AMR.1040.837 13. Chinakhov D.A., Vorobyev A.V., Gotovshchik Yu.M. Simulation of Wind Influence on the Thermal Processes in Gas-Shielded Welding. Applied Mechanics and Materials Vol. 682 (2014) pp. 91-95. www.scientific.net/AMM.682.91 14. Chinakhov D.A., Il’yaschenko D.P., Gotovschik Y.M. MAW Productivity Development and Reduction of its Harmful Effect on Human Organisms. Applied Mechanics and Materials Vol. 682 (2014) pp. 122-126. www.scientific.net/AMM.682.122 15. Chinakhov D.A. Gas Dynamic Control of Properties of Welded Joints from High Strength Alloyed Steels. China Welding. Vol. 23 No.3 (2014) pp. 27-31. 16. Chinakhov D.A. Dependence of Silicon and Manganese Content in the Weld Metal on the Welding Current and Method of Gas Shielding. Applied Mechanics and Materials. Vol. 756 (2015) pp 92-96. doi:10.4028/www.scientific.net/AMM.756.92 17. Il’yaschenko D.P., Chinakhov D.A., Gotovschik Y.M. Influence of Power Supply Energy Characteristics upon the Stability of MMA Process. Applied Mechanics and Materials. Vol. 756 (2015) pp 97-100. doi:10.4028/www.scientific.net/AMM.756.97 18. Il’yaschenko D.P., Chinakhov D.A., Gotovschik Y.M. Calculation of the Heat Content of the Electrode Metal Droplet Wshen Applying Power Supplies for Manual Arc Welding With Different Volt-Ampere Characteristic. Applied Mechanics. and Materials Vol. 756 (2015) pp 101-104. doi:10.4028/www.scientific.net/AMM.756.101 19. Il’yaschenko D.P., Chinakhov D.A., Danilov V.I., Schlyakhova G.V. Influence of arc welding power supply on structural phase composition of X12CrNiTi 18-9 (DIN) weld. Applied Mechanics and Materials Vol 770 (2015) pp 70-75. doi:10.4028/www.scientific.net/AMM.770.70 20. Chinakhov D.A., Vorobyev A.V., Grigorieva E.G., Mayorova E.I. Study of Wind Velocity Impact Upon the Quality of Shielding and Upon the Thermal Processes Under MAG Welding. Applied Mechanics and Materials Vol 770 (2015) pp 253-257. doi:10.4028/www.scientific.net/AMM.770.253 21. Il’yaschenko D.P., Chinakhov D.A., Danilov V.I., Schlyakhova G.V., Gotovschik Y.M. Increasing Strength and Operational Reliability of Fixed Joints of Tubes by ММА Welding. IOP Conf. Series: Materials Science and Engineering. 91 (2015) 012007. doi:10.1088/1757-899X/91/1/012007. http://iopscience.iop.org/1757-899X/91/1 22. Il’yaschenko D.P., Chinakhov D.A., Danilov V.I., Schlyakhova G.V., Gotovschik Y.M. Physical Nature of the Processes in Forming Structures, Phase and Chemical Compositions of Medium-Carbon Steel Welds. IOP Conf. Series: Materials Science and Engineering. 91 (2015) 012006. doi:10.1088/1757-899X/91/1/012006 http://iopscience.iop.org/1757-899X/91/1

Список публикаций

По техническим причинам добавление новых публикаций временно недоступно.

Количество записей: 162

  1. Multi-Pass Laser and Hybrid Laser-Arc Narrow-Gap Welding of Steel Butt Joints / V. Shelyagin [et al.] // Materials Science Forum Scientific Journal: . — 2018 . — Vol. 927 : Materials and Processing Technology II . — [P. 64-71] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  2. How Dynamic Properties of Inverters Influence Electrode Metal Transfer to the Weld Pool, and Change Structural and Phase Composition of Welded Joints Produced via High Alloyed Electrodes / D. P. Ilyaschenko [et al.] // Materials Science Forum Scientific Journal: . — 2018 . — Vol. 927 : Materials and Processing Technology II . — [P. 93-98] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  3. Energy Parameters of Weld Formation Process in MIG-MAG Welding / D. A. Chinakhov [et al.] // Materials Science Forum Scientific Journal: . — 2018 . — Vol. 927 : Materials and Processing Technology II . — [P. 99-105] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  4. Mathematical Formula to Determine Geometrical Dimensions of Electrode Metal Droplets Transferred with Short Circuits / D. P. Ilyashchenko [et al.] // Materials Science Forum Scientific Journal: [Electronic resource ]. — 2018 . — Vol. 938 : Materials and Technologies in Mechanical Engineering . — [P. 1-6] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  5. Materials Science Forum Scientific Journal: . — Zurich : Trans Tech Publications , Vol. 938 : Materials and Technologies in Mechanical Engineering . — 2018. — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  6. Ильященко, Дмитрий Павлович. Влияние энергетических параметров инверторных источников питания на структуру и свойства неразъемных соединений при ручной дуговой сварке : автореферат диссертации на соискание ученой степени кандидата технических наук : спец. 05.02.10 / Д. П. Ильященко; Национальный исследовательский Томский политехнический университет (ТПУ), Юргинский технологический институт (ЮТИ) ; науч. рук. Д. А. Чинахов. — Томск: [Б. и.], 2017. — 18 с.: ил.. — Защита сост. 29.09.2017 г. — Библиогр.: с. 17-18 (12 назв.)..

  7. Поисковые исследования повышения надежности металлоконструкций ответственного назначения, работающих в условиях экстремальных нагрузок и низких климатических температур : Глава 5 / Ю. Н. Сараев [и др.] // Наукоемкие технологии в проектах РНФ. Сибирь / Российская академия наук (РАН), Сибирское отделение (СО), Институт физики прочности и материаловедения (ИФПМ) ; Российская академия наук (РАН), Сибирское отделение (СО), Институт сильноточной электроники (ИСЭ) ; Российская академия наук (РАН), Сибирское отделение (СО), Институт химии твердого тела и механохимии (ИХТТМ) ; Российская академия наук (РАН), Уральское отделение (УрО), Институт машиноведения ; Российская академия наук (РАН), Сибирское отделение (СО), Институт физико-технических проблем Севера (ИФТПС) ; Национальный исследовательский Томский государственный университет (ТГУ) ; Национальный исследовательский Томский политехнический университет (ТПУ) ; Сибирский государственный индустриальный университет (СибГИУ) ; Самарский национальный исследовательский университет имени академика С.П. Королева ; Омский государственный технический университет (ОмГТУ) ; Томский государственный архитектурно-строительный университет (ТГАСУ) ; Алтайский государственный технический университет им. И. И. Ползунова (АлтГТУ) ; под ред. С. Г. Псахье, Ю. П. Шаркеева . — Томск : Изд-во НТЛ , 2017 . — С. 134-202 . — Библиогр.: с. 196-202 (81 назв.)..

  8. Прогрессивные технологии и экономика в машиностроении : сборник трудов VIII Всероссийской научно-практической конференции для студентов и учащейся молодежи, 6-8 апреля 2017 г., Юрга / Национальный исследовательский Томский политехнический университет (ТПУ), Юргинский технологический институт (ЮТИ) ; под ред. Д. А. Чинахова. — Электронные текстовые данные (1 файл: 8,4 Mb). — Томск: Изд-во ТПУ, 2017. — Заглавие с экрана..

  9. Инновационные технологии в машиностроении : сборник трудов VIII Международной научно-практической конференции, 18-20 мая 2017 г., Юрга / Национальный исследовательский Томский политехнический университет (ТПУ), Юргинский технологический институт (ЮТИ) ; под ред. Д. А. Чинахова. — 1 компьютерный файл (pdf; 20 MB). — Томск: Изд-во ТПУ, 2017. — Заглавие с экрана..

  10. Экология и безопасность в техносфере: современные проблемы и пути решения : сборник трудов Всероссийской научно-практической конференции молодых ученых, аспирантов и студентов, г. Юрга, 23-25 ноября 2017 г. / Национальный исследовательский Томский политехнический университет (ТПУ), Юргинский технологический институт (ЮТИ) ; под ред. Д. А. Чинахова [и др.]. — 1 компьютерный файл (pdf; 26 MB). — Томск: Изд-во ТПУ, 2017. — Заглавие с экрана..

  11. Improving Hygienic Characteristics of Coated Electrodes for Welding High-Alloy Steels / D. P. Ilyashchenko [et al.] // IOP Conference Series: Earth and Environmental Science . — 2017 . — Vol. 50 : Ecology and safety in the technosphere: current problems and solutions . — [012047, 6 p.] . — Title screen. — [References: 13 tit.]..

  12. Modeling hydrodynamic flows in plasma fluxes when depositing metal layer on the surface of catalyst converters / D. A. Chinakhov [et al.] // IOP Conference Series: Earth and Environmental Science . — 2017 . — Vol. 50 : Ecology and safety in the technosphere: current problems and solutions . — [012050, 9 p.] . — Title screen. — [References: 23 tit.]..

  13. Investigation of the stability of melting and electrode metal transfer in consumable electrode arc welding using power sources with different dynamic characteristics / Yu. N. Saraev [et al.] // Welding International . — 2017 . — Vol. 31, iss. 10 . — [P. 784-790] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  14. Чинахов, Дмитрий Анатольевич. Газодинамическое управление свойствами сварных соединений из высокопрочных легированных сталей / Д. А. Чинахов // Тяжелое машиностроение научно-технический и производственный журнал: . — 2017 . — № 6 . — [С. 24-27] . — Заглавие с экрана. — [Библиогр.: с. 27 (17 назв.)]. — Режим доступа: по договору с организацией-держателем ресурса..

  15. Chinakhov, Dmitriy Anatol'evich. Dynamic Action of the Shielding Gas Jet Upon the Process of Consumable Electrode Welding / D. A. Chinakhov // IOP Conference Series: Materials Science and Engineering . — 2017 . — Vol. 221 : Innovative Technologies in Engineering . — [012002, 6 p.] . — Title screen. — [References: 15 tit.]..

  16. Chinakhov, Dmitriy Anatol'evich. Influence of gas shielding method in welding with consumable electrode on heat distribution in a welded product / D. A. Chinakhov, E. G. Grigoryeva, E. I. Mayorova // Solid State Phenomena . — 2017 . — Vol. 265 : Materials Engineering and Technologies for Production and Processing III . — [P. 463-469] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  17. Influence of Gas Dynamic Processes on Chemical Composition of Hardfaced Layer when Restoring Machine Parts Manufactured from 40H Steel / D. A. Chinakhov [et al.] // Materials Science Forum Scientific Journal: . — 2017 . — Vol. 906 : Materials and Processing Technology . — [P. 248-252] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  18. Comparative analysis of hygiene and sanitary characteristics of consumable electrode gas-shielded welding / N. V. Pavlov [et al.] // Materials Science Forum Scientific Journal: . — 2017 . — Vol. 906 : Materials and Processing Technology . — [P. 137-141] . — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  19. Materials Science Forum Scientific Journal: . — Zurich : Trans Tech Publications , Vol. 906 : Materials and Processing Technology . — 2017. — Title screen. — Режим доступа: по договору с организацией-держателем ресурса..

  20. Impact of the Chemical Elements Upon the Convective Flows in the Molten Metal of the Weld Pool / V. D. Sarychev [et al.] // IOP Conference Series: Earth and Environmental Science . — 2017 . — Vol. 66 : Ecology and safety in the technosphere . — [012017, 9 p.] . — Title screen. — [References: 11 tit.]..

Страницы: 1 2 3 4 5 6 7 8 9